Precautions for the use of hand-held power tools
Addtime:2022-05-19 08:41:06Source:浙江金美电动工具有限公司Hits:
The development of power tools has further improved people's production level. With the simplification of the operation of various power tools, many families are also equipped with a complete set of power tools. As a non-professional, there are the following precautions when operating and using various hand-held power tools.
1: When using power tools with protection class 1, the operator needs to wear insulated gloves and insulated boots, and must be safe. When general power tools are purchased as household tools, it is recommended to use the second-class tools.
2: Do not use first-class protective power tools for direct construction in places with excessive air humidity or on metal components with good electrical conductivity. If you want to operate, you need to use third-class or second-class tools.
3: Before using the power tool, it is necessary to check whether the metal casing is damaged on the outside of the power tool, whether the handle is broken, and there must be no exposed wires.
4: Before using the hand-held power tool, test run it to see if its rotating part is flexible, and do not operate it blindly.
5: When operating hand-held power tools on various metal containers and metal pipes, it is not recommended for non-professionals to directly use the power tools.
6: The accessories of the hand-held power tool need to be inspected in good condition, and all kinds of wear and tear shall not occur.
1: When using power tools with protection class 1, the operator needs to wear insulated gloves and insulated boots, and must be safe. When general power tools are purchased as household tools, it is recommended to use the second-class tools.
2: Do not use first-class protective power tools for direct construction in places with excessive air humidity or on metal components with good electrical conductivity. If you want to operate, you need to use third-class or second-class tools.
3: Before using the power tool, it is necessary to check whether the metal casing is damaged on the outside of the power tool, whether the handle is broken, and there must be no exposed wires.
4: Before using the hand-held power tool, test run it to see if its rotating part is flexible, and do not operate it blindly.
5: When operating hand-held power tools on various metal containers and metal pipes, it is not recommended for non-professionals to directly use the power tools.
6: The accessories of the hand-held power tool need to be inspected in good condition, and all kinds of wear and tear shall not occur.
